# How to Estimate and Prepare Drywall Take-Offs

Many contractors have a tough time when estimating and completing take-offs for drywall work, but figuring the amount of drywall and other materials needed for a project is really a simple task. Follow the same steps that professionals and large companies use to count drywall sheets, mud, tape, screws, and corner bead. Once you have an idea of the quantities, you can quickly calculate the total materials cost.

## Measure Square Footage

Measure the total square footage of the areas where the drywall will be installed. Multiply the width times the height of each wall or ceiling area, then add all of the quantities together to get a total square-foot amount.

## Estimate Drywall Sheets

Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you're using 4-by-8 sheets) or by 48 (if you're using 4-by-12 sheets).

This division will get you the numbers of full sheets required. It's a good idea to add 10 to 15 percent for waste and odd cuts. For example, if your total area is 1,600 square feet and you're using 4-by-8 sheets:

1,600 divided by 32 = 50 sheets
50 + 5 (10 percent add-on) = 55 sheets

If you want to get the cost, just multiply the total number of sheets by the price per sheet. Remember to add local taxes and delivery charges.

## Estimate Drywall Tape

Using the total number of drywall sheets needed, multiply by the perimeter of each sheet to determine the linear feet of joint tape for the drywall. The perimeter of a 4-by-8 sheet is 16 feet; the perimeter of a 4-by-12 sheet is 20 feet. For example, if you need 55 4-by-8 sheets, the total tape needed is:

55 x 16 = 800 feet

Most rolls of tape contain 500 feet, so divide your total by 500 to determine how many rolls tape you will need. Once that you know how many rolls of drywall tape is required, multiply by the cost per roll.

## Estimate Joint Compound

As a general rule, estimate 0.053 pounds of mud per square foot of drywall. So, multiply the total number of square feet by 0.053 to determine how many pounds of compound you'll need. For example, if you are putting up 1,600 square feet of drywall, you would need:

1,600 x 0.053 = 84.8 pounds of compound.

## Estimate Drywall Screws

To determine the pounds of screws required, divide the square footage of drywall by 300. For example, if you have 1,600 square feet of drywall:

1,600 divided by 300 = 5.33 pounds of screws

For corner beads, count the number of outside wall corners in the entire job. Plan on using one full corner bead for each corner, using either 8-foot or 10-foot bead.

If there are soffits or other structures with outside corners, measure the total length of all of these elements and divide by the length of a single corner bead (8 or 10). Add this amount to the wall-corner count.